This site uses cookies. You can read how we use them in our privacy policy.

OBD 1510 D - RS232/422/485 Serial and GPI Bidirectional Fiber Transceiver

OBD 1510 D - RS232/422/485 Serial and GPI Bidirectional Fiber Transceiver
  • Description
  • Features

The OBD 1510 D is a pair of multi-function modules which will extend the reach of serial RS232, RS422 or RS485 as well as two GPI (general purpose interface) up to 10km (6.2 miles) over a single bidirectional fiber link (WDM)

A single RJ45 electrical serial connection can be configured for RS232,RS422 or RS485 serial standards. A separate RJ45 connector is provided for two electrical GPI inputs and outputs. Serial communications and GPI are transmitted and extended over the same fiber link.

The OBD 1510 D is completely agnostic to the serial protocol used, and supports all standard protocols and proprietary protocols at data rates from 300 to 460K Baud (auto sensing and auto adjusting).

The integrated dip switch provides precise control over the serial mode of operation with selections for the serial standard, serial termination, RX/TX crossover and RS422/485 data direction (automatic or manual). Data activity LEDs are provided for the serial port and the GPI port under the respective RJ45 connectors.

The OBD 1510 D also supports mixing and matching of serial standards. For example: the transmitting module can have a RS232 input, and the receiving module can be set for RS422 output.

The OBD 1510 D is 100% plug and play, hot pluggable and no special software drivers are required.

Note: For detailed connection information please refer to Data Sheet (PDF) on the Lynx Technik web site


Callback form

For more information about this product please contact us by calling 0118 981 0804 or by emailing us
Alternatively you can fill in this callback form and we will give you a call to discuss your requirements

Name *
Email *
Phone *
* Must be completed